Multi-Di@g Access J2534 Pass-Thru OBD2 Device

Car Diagnostic Tool Series

Multi-Di@g Access J2534 Pass-Thru OBD2 Device


Description:

Multi-Di@g Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.
Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.


Functions: 

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

1.Maintenance
Diagnosis codes from all computers 
Reset maintenance interval 
Modification of the sewage 
Read / erase fault calculators 
Maintenance of the particulate filter 

2.Air Conditioning
Diagnosis of cooling electronic 
Reading settings cooling circuit, 
Test servo actuators 

3.Pollution control
Diagnosis of the particulate filter 
Electronic control of pollutant emissions 
Control of the Lambda probe

4.Liaison to the ground
Electronic configuration of the size of tires, 
Electronic configuration of tires (winter / summer), 
Setting valves tire pressure 
Diagnosis and management of shock-driven 
Calibration of the sensor angle Driving (initialization of the steering angle) 

5.Body
Implementation of safety airbags (lock / unlock) 
Reconfiguration of a new calculator Airbag, 
Diagnosis of calculators Airbag, 
Rain sensor windshield (reading and erasing fault) 
Test panel and activators of lights, 
Setting Xenon headlights, 
Rear radar

6.Post-Equipment
Setting up the radio, 
Configuration loader CD, 
Setting alarms 
Configuration of the coupler, 
Configuration bicycle loading system

7.Braking
Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.

8.Motor
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..) 
Programming of injectors
Electronic configuration of the EGR valve 

9.Expert Mode
Diagnosis of advanced computers, 
Configuration of comfort functions, 
Change the language of the instrument panel, 
physical measures (option with a probe - not supplied) 
Direct access to all functions of diagnosis.


Specification:

1.Language
Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.

2.Characters
Compliant to SAE J2534 & J2534-1 
Either RS 232 or USB interfaces to PC 
K-Line ISO 9141 (100 mA) 
KWP 2000 ISO 14230-4 
SAE J1850 PWM 
SAE J1850 VPW 
CAN 2.0B ISO 11898 
CAN ISO 15765-4 
SCI SAE J2610 
Programmable power supply 
On-board memory

Please pay attention Multi-Di@g Access J2534 Pass-Thru OBD2 Device is not good at programming function.And it is not good at Japan cars.

Software display:

Package list:

VCI (Vehicle Communication Interface) 
DB25 to OBD-2 Male cable 
OBD2 Male to OBD2 Female cable 
DIN6 to USB cable 
DIN6 to DB9F cable