Myobdii

The ford vcm how testing focus

admin — Fri, 11 May 2012 06:20:43 +0000

First you need connect the ford vcm with the car ,plug the obd cable Inside the car obd port,
Connect the usb with laptop (the software should ready for use)
Check The local area connection already build and ready for use
When you connect everything ok .the led light will flashing (number 2 and number 5 led light will keep flashing)
And then we need click the ids icon on the laptop desk .
If it is your first time use the ford vcm .you have to connect the car,ford vcm device ,
When it coming out the dialog box,choose the deletes session .then we will enter the diagnosis page .
If you are the first time use this ford vcm ,look at the lower right corner
The green light icon means the engine is on(make sure the engine is on,it’s very important) ,it also show you the ford vcm little icon,it means the ford vcm is connection
Firstly
We need choose start new session,and click all other ,then choose yes.next buit the connection,
Few seconds later .it will coming out vehicle built before march 2008 .the car model is new ,
So choose “NO”
And the VIN code is correct ,click yes .systerm now is connection
Then waiting for a while ,the page show you odometer ,and then click the green button ,mean yes ,
Then it will show you the car information,
You can found one more icon on the page ,that means ford diagnosis ,click the last icon on the top of the page ,choose the electrical ,then choose the exterior lighting ,then we choose the data link monitor ,then we can check out the fault code on the laptop for the ford car.
Turn on the car light ,the park_sw is on ,when you turn off the car light ,the park_sw is off,
After these steps ,it can prove our device ford vcm work perfectly

If you think this article help you, please click on the “Like”,if you have any other question ,
pls contact with us here www.facebook.com/Myobdii tell us your issue.
Learn more at:

http://www.myobdii.com

How to Setup and Registration ds708

admin — Thu, 10 May 2012 10:01:15 +0000

First put in the mermory card inside the ds708 main unit .use the power cable .
Connect the das708 main unit ,turn on the button which on the top of ds708
and then the button on the right corner will turn green ,
when we open the ds708 diagnosis page ,click setup/help
click the touch icon,make sure the touch pen ,and touch screen working good.
The first icon on the left of page is wifi icon,click on it ,
You will go to w-lan setting ,setting the network correctly.
There are eight different languages available
When you click the “about” icon ,then it will show you
Software version ,os version ,hardware,product serial number ,registration password
Take note of this information since you may be asked about the software version ,the os version ,and the serial number ,when contacting technical support.
Also ,to register the tool you will need the serial number and password ,which will allow you to
Access important software updates.
Connect the lan cable ,also connect the ds708 with your car ,star the ds708
Then it will notice you need register ,click next ,pls be careful read all the information on the device ,after you finish it ,exit it .and then click complete registration
Then click turn off .exit the ds708.
You also can register on the ds708 website ,go to the www.maxidas.com
Go to the website ,read the registration information first and cleck agree ,
Use your product serial NO. and register password ,so clieck next ,fill in all your information
And then click submit.
The user will now have access to free updates for one full year

If you think this article help you, please click on the “Like”,if you have any other question ,
pls contact with us here www.facebook.com/Myobdii tell us your issue.
Learn more at:

http://www.myobdii.com

BDM100 (V.1255)

admin — Tue, 08 May 2012 02:28:26 +0000

1.fuction of BDM 100
BDM 100 new version is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU
2.how to use it
1.it requires the ECU to be open, “on the bench”, as the reading/programming operations are realized by linking a flat cable to specific area the ECU

it allows also to create perfect copies of the whole software of an ECU ,after having read the original ECU software)
3.about the software
The software allows to read and program the WHOLE ECU content of:
29BL802 SSOP eprom file (or ROM memory with maps if eprom physically not present);
MOTOROLA MPC5xx Processor file;
Serial Eprom content.
But Please note that even in the case of the ECU blocking, due to the wrong checksum recalculation, the ECU can always be reprogrammed and then retrieved
This is the picture of the BDM 100,it is easy to use

AK90 BMW KEY-Prog

admin — Mon, 07 May 2012 10:27:36 +0000

1.What the function of AK90 BMW KEY PROGRAMMER
AK90 BMW KEY-PROG increased by 1995-2009 in all BMW EWS / CAS read the key information functions; improved some of the EWS to read and write speed. This product safe and effective, is the key to match the best tool for BMW!
Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself .
With the help of software you can change VIN , Mileage and renew , lock or unlock keys as well .
Programming original chips “EML 10030A” for making keys .
4. Identifying keys for all EWS and CAS , showing VIN , key No. and mileage .
The lastest update software version is V3.01 for EWS4.

ADS-1S PC-Based Universal Fault Code Diagnostic Scanner

admin — Sat, 05 May 2012 06:04:49 +0000

The ADS-1 is a PC (notebook) platform cars car fault diagnosis system can detect the production models of the Asia, Europe and the United States and other countries. Support a variety of automotive communication mode, a full-line fault diagnostic apparatus

Features:
1, the hardware is compatible with a variety of PC desktop and notebook
2, the software is compatible with the WIN98 \ 2000 \ XP \ VISTA, \ and WIN7 each operating system
3 can be detected in Asia, Europe and the United States and other countries the production of various models
4, support the CAN bus and other vehicle communication protocol
5, wireless cable and two diagnostic mode, the wireless range of up to 20-100 m
6, online automatic upgrade service
7, data analysis to support the Select and choice of two modes
8, the dynamic data to support recording and playback

Description

Technical parameters：

Applicable platform: laptop or desktop computer (windows98 \ 2000 \ me \ xp \ vista \ win7)
Wireless transmission frequency: Bluetooth 2.4GHZ
Means of communication: wired and wireless
Communication distance: 3 m cable, wireless 20-100 m
Print method: PC Network Printing
Upgrade: network upgrade
Supported languages: English, Chinese

The ADS-1 fault detector and genuine well-informed car C168 fault detector

Same Points:
1, is the PC version, with the home computer use, with wireless Bluetooth can be used in desktop and notebook

Software operation simple installation, on-line upgrade

Different points

1, well-informed car C168 upgrade is very slow, almost half a year before upgrade, mainly because of piracy car now too well-informed, market sales of the car is well-informed almost all of the piracy seriously damage the interests of the genuine users and manufacturers, so genuine The manufacturers do not want to upgrade, and is phasing out the car informed C168 the device.

2. ADS-1 is with a new encryption technology, in order to piracy is very difficult, so on the market are genuine ADS-1 detector. The manufacturer stresses credibility, high quality, to build the first brand of PC detector upgrade fast, almost every week there are new models and upgrading, each region has a person responsible for the service.

Detection models, The models of ADS-1 is more than C168 detection, especially the last two years new car ADS-Basic can be detected, the car informed C168 which almost no (because it is too long the time did not upgrade.)

3, the hardware quality of the ADS-1 detector is a newly developed product, using the latest optimization design of the circuit, the work is very stable
If you think this article help you, please click on the “Like”,if you have any other question ,
pls contact with us here www.facebook.com/Myobdii tell us your issue.
Learn more at:http://www.myobdii.com

Digimaster III Original Odometer Correction Master

admin — Fri, 04 May 2012 05:36:40 +0000

Digimaster 3 also is called Digimaster III or shortly D3 is new developed odometer correction master. It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc

What is the highlights of Digimaster III?
1. It contains a high performance hardware platform which takes high-speed CPLD and the ARM11 processor as the core technology
2. It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc
3. It contains the advanced technology of programming new keys for BMW and Benz, CAS-BDM reading/writing and resetting; 35080V6 erasure etc. large numbers of pictures and particular description makes your operation pleasant .

Main function of Digimaster III:
1. Odometer correction
2. Audio decoding
3. Airbage reset
4. ECU programming
5. PIN Code Reading
6. BMW key programming

Newly Update for Digimaster III

1. DigiMaster-III Newly added key programming function
It is applicable for high-class cars such as Mercedes Benz and BMW. Innovative automatic mode for key programming technology, multi-language operation, the key programming complete in one go, effectively ensure the security of reading and writing data.
2. DigiMaster-III New Generation Core Framework
Applying the new G3 platform of Yanhua Tech and the innovative consumption mode of “Pay as you go”support the latest car, global synchronic upgrade, extend and integrate functions freely.
3. DigiMaster-III Intelligent Operation Platform
Upgrade the single-task system into intelligent multi-task and multi-thread operation system, extend functions freely and unlimitedly.
4. Upgrade the single-task system into intelligent multi-task and multi-thread operation system, extend functions freely and unlimitedly.
5. DigiMaster-III Comprehensive Upgraded Operation Interface
It breaks away from the original monotonous static interface, based on IE core technology to support rich and dynamic effects as well as advanced skin interface. And it is more beautiful and friendly, supports for many language around the world.
6. DigiMaster-III High Definition Digital Screen
Upgrade the low definition LCD color screen (320X240) to the imported HD digital TFT color screen (800X480) which applying the precision touch technology

Update Methods: Online update.

Special feature:

1. Support OBD-II interface odometer adjustment of Volkswagen, Audi, Benz, BMW and BMW 7 Series models: E65 CAS and the 2009 Audi A6L and Q7.
2. Read BMW CAS1/ 2/ 3 data by CAN interface.
3. Online reading BMW CAS1/ 2/ 3/ 3+/ 4, Mercedes-Benz EIS EEPROM and FLASH data by BDM.
4. Support the Mercedes-Benz S, C, E, odometer and EIS adjustment; Porsche, Ferrari, Bentley and other European luxury cars odometer adjustment; Chinese domestic car MCU and engineering machinery odometer adjustment;
5. Support the MOTOROLA/FREESCALE series CPU (including some CPU flash) data read and write.
6. Support key programming for Mercedes Benz and BMW series cars.

It is different from the ordinary car decoder, an intelligent, networked, multi-functional, multi-forms of diagnostic programming device, easy to experience the cutting edge of automotive Intelligent Maintenance!
If you think this article help you, please click on the “Like”,if you have any other question ,
pls contact with us here www.facebook.com/Myobdii tell us your issue.
Learn more at:http://www.myobdii.com

Car diagnostic tool assist with the auto computer system diagnosis

admin — Thu, 26 Apr 2012 08:09:09 +0000

When you start putting together a collection of Car Diagnostic Tools for your automobile there are some basic tools that no collection would be in good standing without. These are the basic tools for cars that are designed to cover the most common car problems you might encounter. Some may seem primitive and trivial and may even be held in contempt by some, but they are all serve a vital purpose when the need arises. Obviously there are too many tools to mention that could go into your collection, but there are a precious few that cannot and should not be ignored.

One of the tools for the Car Workshop that should definitely make its way into your collection is the screwdriver. It is a good idea to keep a variety of screwdrivers in your tool box, some with the basic straight edge and some with the Phillips. There are many screws in an automobile and having the right screwdriver at the right time is essential. Another must have tool is the pliers. Pliers come in various forms and are a luxury to have in your collection. Locking pliers called vice grips can be a very valuable addition.

Wrenches are also quiet necessary for your Automotive Tools collection. Wrenches are manufactured in both standard and metric forms of measurement. These wrenches come in a vast variety of sizes and are invaluable when you need to adjust a nut or bolt. The crescent wrench and or adjustable wrench are the one size fits all tools that eliminate a lot of searching for the right wrench. There are combination wrenches as well that have a different size on each end of the wrench. Wrenches may very well be the most popular tools in any collection. They are practical and widely used in many places on the car.

A tool collection would not be proper if it did not have a nice ratchet set included. The ratchet set or also called a socket set, can really be helpful when you are trying to loosen or tighten tough nuts and bolts on your car. Sockets come in a variety of measurements just like wrenches only the socket is attached to a ratchet that allows you to lock onto the nut and crank it loose or tighten it quickly. The ratchet set is quite famous and should find its way into your collection of tools for your car.

If you keep a variety of screwdrivers, pliers, wrenches, and a good socket set in your tool collection you will be in good shape. Of course it is always good to have a claw hammer in your tool box as well. Some type of hacksaw is a good addition as is a battery operated drill. You can add a few of your own favorites as well, but carry the tools we have mentioned and you will have the definite Garage Equipment collection.

BMW OBDII scanner from China

admin — Tue, 24 Apr 2012 02:38:35 +0000

BMW Scanner V2.20 is the most popular vehicle scanner for BMW cars in auto repair factory or individuals, even many 4s shops would choose this tool to maintain customer’s loving cars. It is obvious BMW GT1 DIS SSS has the great impact on maintaining BMW cars.

BMW Scanner V2.20 is a special-design for BMW Series. It can coverage all of BMW systems. one thing that can only be done using the scanner, this function is called Electronic Control Unit (ECU) programming and configuration.

It is no doubt that there are variety of auto diagnostic tools in the worldwide market, so if you want to figure out the most comparable and with cheapest price auto diagnostic tools then you need to spend a lot of time on searching the information in google or other professional auto web. If you are a technical person who deals with the auto maintain matters by yourself, you must know it very well.

BMW Scanner group tester one (BMW Scanner) is offered to diagnose BMW series cars after 1996. It can coverage all BMW system, also can do ecu programming and coding. xcardiag supplies this tool with endless technical services, high quality, lowest price and warranty . here are some introduce of BMW Scanner V2.20, hope they can help you choose your best BMW Scanner.

BMW Scanner V2.20 function:

Do connect with the electronic control modules, and professionally read identification data/sw/hw versions, user information fields. They can also read and clear error (DTCs) memories absolutely， and program memory of electronic control units (including CAS DME/DDE modules).

BMW Scanner V2.20 supported BMW vehicles:

1 Series: E81/E82/E87/E88
3 Series: E90/E91/E92/E93
5 Series: E60/E61
6 Series: E64
7 Series: E65
X Series: X3-E83,X5-E53, X5-E70, X5-E71

System:

BMW Scanner V2.20 Supported All systems of BMW series and OBD-II diagnosticsystem, such as
Engine system ,Auto Transmission ,SRS ,ABS ,Cruise system ,Air-condition system ,LKE ,BUS and so on.

In addition there are some other kinds can work on the BMW cars as well, some may with strong functions, wide coverage, but if you want to find a tool especially for the BMW cars，then you must think about BMW Scanner V2.20 , compare with the other you will find that no matter what you choose to compare, you finally realize we are the best, because we are the most professional、 cheapest、and compatible

By the way, it is hot sale now, also we have discount for you, so what are you waiting for?
If you think this article help you, please click on the “Like”,if you have any other question ,pls contact with us here www.facebook.com/Myobdii tell us your issue.
Learn more at:http://www.myobdii.com

Where to buy good Auto diagnostic tools from China

admin — Mon, 23 Apr 2012 01:21:03 +0000

If you want a great deal on some really amazing scanners, code readers and car diagnostic tool,you can go to http://www.myobdii.com. They have everything you could possibly need to decipher what is really going on in an engine or vehicle computer system and get the right tools and equipment to fix it all. They have all the latest and great innovations as well as scanners for older makes and models that aren’t in production any more but still need work and can be sold or bought by new owners. There are all of the decoding and diagnostic tools to fit any user’s needs, whether your needs are as an owner, a re-seller, appraiser or repair specialist. They can be used to make sure no one is taking advantage of either them or any new buyer. This site even has products for DIYs in China, at factory price.

But there is so much more too. You can find decoding and resetting tools, mainly with VAG-COM diagnostic interfaces, but some for older set-ups for discontinued items. There are trouble code readers, V-checkers, the all-important mileage correction tools, every kind of scanner you can imagine, transponder key programmers and multiplexer interfaces. There are items for everything from European vehicles, like the rare VW and Audi scanners, Japanese makes and plenty for the good old U.S. made trucks and cars.

2011 new product mb sd star C4

admin — Sat, 21 Apr 2012 02:01:06 +0000

Automotive diagnostic tool support reading out & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming,And it is quite necessary for many people. Here are some introductions for the functions and coverage install scn coding ,Take mb star C4 for example,
Function introduces of mb sd star C4:
reading out & erasing trouble code2.reading the real-time data of sensor and actuator3.coding and programming.4. MB SD Connect Compact 4 support wireless diagnose, support K line,CAN BUS and UDS protocol5.fit all computers (we support the dell d630 laptop)
Language Coverage:1：21 kind of language software :english,Chinese; Croatian ; Czech; Danish; Dutch; Finish; French; German; Greek; Hungarian,Italian; Japanese; Korean; Polish; Portuguese; Romanian,Russian; Spanish; Swedish; & Turkish.2:with xentry 3: with developer software 4: you can order scn offline software add it (optional)5: you can add truck speed limited unlock (optional) 6: you can add sbc unlock function ( optional)
Therefore, you will never worry about the match of the devices with your cars.we provide kind of service we can supplied:1:how to set and use benz sd connector compact 4. for most people dont know how to setting software ,so they find multiplexer can not connect with the car.2: you can get the support ,for example online scn coding ,special password provide,multiplexer unlock….like that. (it is a option service)3: when you repaire the benz car ,any question you can tell us,we will be happy to help you .
FAQ:
Q:What’s difference online scn coding and offline ?
A:different model different way .
for example ECU. ESP ETC —online
Tire. Door SBC… ……offline
if you buy the ECU ( alredy have data inside ) just only use developer to do and working .
Q:Do you have wifi card in your multiplexer ?
A:Yes,It is included.
Q:my software show 870 wrong code, what’s wrong ?
A:your multiplexer is been locked.we can help you online unlock it.
Q:hat is the 662 wrong code meaning ?
A:you can not update your mux hardware.it have been locked.
so we are not just sell benz sd connector compact 4 ,we also proived technic support. Anyhow, the wide usage and wide availability will bring more convenience and safety to you. Automotive diagnostic tool together with other devices such as reading out & erasing trouble code and coding and programming will make your life more relaxed and easy.
If you think this article help you, please click on the “Like”,if you have any other question ,pls contact with us here www.facebook.com/Myobdii tell us your issue.